Question 1 – bottom paper is broken

Bottom paper is broken and the bottom of the label paper quality, tag traction way to scrape the bottom paper, adhesion of the three closely related to several factors.

The solution:

A. check whether there is the bottom paper cuts, such as cut the bottom paper, you may need to change the quality of the high quality base paper. Build recommended gration bottom paper, and require labels supplier control die cutting depth, not hurt the end of paper.

B. check whether there is a scratch in the tags around, eliminate scratch factors.

C. if label adhesion, labels easy to tear. Control the next standard length, guarantee the adhesion to the labeled products.

Question 2 – labeling deviation than accuracy requirement

Label bias and take partial, logo with go and product delivery is not parallel, traction wheel slip, product positioning inaccurate detection, tag along the cover on the wheel on the product, several factors related to product error, check the above several factors, targeted to solve.

The solution:

A. take partial, relax traction institutions, pull the label back and forth, let it go is automatically. Labels are after, the clamp on both sides of the limit circle, guide is the label.

B. the conveyer, trends and products go parallel, by adjusting the inclination of the labeling head can realize parallel.

C. traction wheel slip, traction wheel wear, traction wheel lock screw loosening, two reasons can tighten the traction wheel lock screw.

D. product error, the product production process, the edge error will cause labeling deviation, only good control the quality of the products can be solved.

Question 3 – straight out

Straight out of the standard and the standard is not completely related to magic eye detection sensitivity, sensitivity adjustment, chapter adjusting with the adjust method please refer to the front of magic eye.

The solution:

A. is still unresolved, such as adjusting the electric eye, may be to label beyond the scope of use magic eye, or magic eye damage, need to consult the manufacturer.

B. away another reason for the partial, magic eye didn’t detect tag, adjust the magic eye to detect position before and after.

Problem four – strip off the plate at the bottom paper relaxation

The solution:

A. the bottom paper relaxation associated with low speed and traction institutions skid, for drawing speed is too low, then improve the traction speed can solve;

B. if sliding traction mechanism, then twist traction roller lock screw to bottom paper don’t skid.

C. in addition, pay attention to receiving axis behind the drive belt is broken.

Guangzhou zhuo teng machinery equipment co., LTD., south China’s most professional labeling factory house, no bottle no stick, one-stop services, for you to choose the most reasonable solution for labeling machine.